Ford Ranger (2012-2021) PX Series Drivetech4x4 Offset Upper Control Arm (Pair)
Ford Ranger (2012-2021) PX Series Drivetech4x4 Offset Upper Control Arm (Pair)
The Drivetech arms have been designed to restore camber & caster lost on the IFS vehicles once they have been lifted, by correcting the angle of the ball joint. Without restored camber & caster settings lifted IFS vehicles will eventually show excessive tyre wear and experience ride & steering issues.
| Part No. | DT-UCA002 |
| Type | CONTROL ARM SET |
| Brand | DRIVETECH 4X4 |
| Unit of Measure | KIT |
| Description | Drivetech 4x4 Offset Upper Control Arm (Pair) |
| Warranty | Two Years |
| Length | 43 |
| Width | 23 |
| Height | 17 |
| Weight | 7.32kg |
Technical Warning!
Please note, IF CV is for lifted vehicles it is designed in PLACE of a diff drop.
2-3" lifted vehicles:
These are NOT intended to be used WITH a diff drop, at this height, the choice of a lifted vehicle should be ONE or the OTHER. It is rare that a vehicle requires BOTH and you should consult our team before buying or installing these.
3-5" lifted vehicles:
These CAN be used with a diff drop, and should be added together in terms of distance and alignment. Example 1: A 2" diff drop and a 2" lifted CV would be suitable for ~4" lifted vehicle. Example 2: A 4" diff drop and a 2" lifted CV would NOT be suitable for a 4" lifted vehicle as this is 6"s. If in doubt please contact our team
Not following the above can result in exploded CVs, which is not covered under warranty.
Ford Ranger (2012-2021) PX Series Drivetech4x4 Offset Upper Control Arm (Pair)
Ford Ranger (2012-2021) PX Series Drivetech4x4 Offset Upper Control Arm (Pair)
The Drivetech arms have been designed to restore camber & caster lost on the IFS vehicles once they have been lifted, by correcting the angle of the ball joint. Without restored camber & caster settings lifted IFS vehicles will eventually show excessive tyre wear and experience ride & steering issues.
| Part No. | DT-UCA002 |
| Type | CONTROL ARM SET |
| Brand | DRIVETECH 4X4 |
| Unit of Measure | KIT |
| Description | Drivetech 4x4 Offset Upper Control Arm (Pair) |
| Warranty | Two Years |
| Length | 43 |
| Width | 23 |
| Height | 17 |
| Weight | 7.32kg |
Technical Warning!
Please note, IF CV is for lifted vehicles it is designed in PLACE of a diff drop.
2-3" lifted vehicles:
These are NOT intended to be used WITH a diff drop, at this height, the choice of a lifted vehicle should be ONE or the OTHER. It is rare that a vehicle requires BOTH and you should consult our team before buying or installing these.
3-5" lifted vehicles:
These CAN be used with a diff drop, and should be added together in terms of distance and alignment. Example 1: A 2" diff drop and a 2" lifted CV would be suitable for ~4" lifted vehicle. Example 2: A 4" diff drop and a 2" lifted CV would NOT be suitable for a 4" lifted vehicle as this is 6"s. If in doubt please contact our team
Not following the above can result in exploded CVs, which is not covered under warranty.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ford Ranger (2012-2021) PX Series Drivetech4x4 Offset Upper Control Arm (Pair)
The Drivetech arms have been designed to restore camber & caster lost on the IFS vehicles once they have been lifted, by correcting the angle of the ball joint. Without restored camber & caster settings lifted IFS vehicles will eventually show excessive tyre wear and experience ride & steering issues.
| Part No. | DT-UCA002 |
| Type | CONTROL ARM SET |
| Brand | DRIVETECH 4X4 |
| Unit of Measure | KIT |
| Description | Drivetech 4x4 Offset Upper Control Arm (Pair) |
| Warranty | Two Years |
| Length | 43 |
| Width | 23 |
| Height | 17 |
| Weight | 7.32kg |
Technical Warning!
Please note, IF CV is for lifted vehicles it is designed in PLACE of a diff drop.
2-3" lifted vehicles:
These are NOT intended to be used WITH a diff drop, at this height, the choice of a lifted vehicle should be ONE or the OTHER. It is rare that a vehicle requires BOTH and you should consult our team before buying or installing these.
3-5" lifted vehicles:
These CAN be used with a diff drop, and should be added together in terms of distance and alignment. Example 1: A 2" diff drop and a 2" lifted CV would be suitable for ~4" lifted vehicle. Example 2: A 4" diff drop and a 2" lifted CV would NOT be suitable for a 4" lifted vehicle as this is 6"s. If in doubt please contact our team
Not following the above can result in exploded CVs, which is not covered under warranty.
